Easy-mix metal hardener (gb)

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH)Printed Easy-Mix Metal Hardener (GB)
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Name of product
Easy-Mix Metal Hardener (GB)Code-Nr. 10652-1 Manufacturer/distributor
WEICON GmbH & Co. KGKönigsberger Straße 255, DE-48157 MünsterPostbox Phone ++49(0)251 / 9322 - 0, Fax ++49(0)251 / 9322-244 E-Mail : info@weicon.deInternet : www.weicon.de Emergency advice
Giftnotruf Bonn: Bei Vergiftungen (in case of poisoning)Phone Recommended intended purpose(s)
2-Component Epoxy Resin - Hardener Component
2. HAZARDS IDENTIFICATION
Special hazards information for humans and environment
Not classified as dangerous preparation according to Directive 1999/45/EC.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical characterization
Hardener for a 2-component epoxy adhesive
Hazardous ingredients
[% weight]
Classification
4. FIRST AID MEASURES
General information
Remove contaminated soaked clothing immediately and dispose it safely.
In case of inhalation
Ensure of fresh air.
In the event of symptoms refer for medical treatment.
In case of skin contact
In case of contact with skin wash off with soap and water.
Consult a doctor if skin irritation persists.
In case of eye contact
May cause superficial burns.
In case of contact with eyes rinse thoroughly with water.
Seek medical advice immediately.
In case of ingestion
Do not induce vomiting.
If swallowed by mistake drink plenty of water and seek medical treatment.
WEICON GmbH & Co. KG Königsberger Straße 255 D-48157 Münster
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH)Printed Easy-Mix Metal Hardener (GB)
Treatment (Advice to doctor)
In the event of pulmonary irritation treat initially with dexamethasone metered-dose aerosol.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media
Foam
Dry fire-extinguishing substance
Carbon dioxide
Water spray jet
Extinguishing media which must not be used for safety reasons
Full water jet
Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases
Fire gas of organic material has to be classed invariably as respiratory poison.
Nitrogen oxides (NOx)
Carbon monoxide (CO)
Carbon dioxide (CO2)
Special protective equipment for fire-fighters
Use breathing apparatus with independent air supply.
Fire-fighting operations, rescue and clearing work under effect of combustion and smoulder gases just may be done
with breathing apparatus.
Additional information
Fire residues and contaminated firefighting water must be disposed of in accordance with the local regulations.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions
Ensure adequate ventilation.
Use personal protective clothing.
Environmental precautions
Do not discharge into the drains/surface waters/groundwater.
Do not discharge into the subsoil/soil.
Methods for cleaning up
Send in suitable containers for recovery or disposal.
Take up with absorbent material.
7. HANDLING AND STORAGE
Advice on safe handling
Avoid formation of aerosols.
Care for thoroughly room ventilation, if necessary use in well ventilated area with local exhaust ventilation at workplace.
Advice on protection against fire and explosion
Take precautionary measures against static discharges.
Requirements for storage rooms and vessels
Keep in closed original container.
Further information on storage conditions
Keep container tightly closed and store at cool and aired place.
WEICON GmbH & Co. KG Königsberger Straße 255 D-48157 Münster
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH)Printed Easy-Mix Metal Hardener (GB)
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Additional advice on system design
Sufficient ventilation and exhaustion.
Respiratory protection
If ventilation insufficient, wear respiratory protection.
Hand protection
In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the
gloves.
Chemical protective gloves must be chosen carefully in view of their design and depending on the dependence on the
concentration and amounts of dangerous goods used in the specific working tasks.
Glove material specification [make/type, thickness, permeation time/life, wetting resistance]: butyl rubber, 0,7mm; 480min
Eye protection
tightly fitting goggles
protective shield
Skin protection
protective clothing
General protective measures
Avoid contact with eyes and skin
Do not inhale gases/vapours/aerosols.
Hygiene measures
At work do not eat, drink and smoke.
Wash hands before breaks and after work.
9. PHYSICAL AND CHEMICAL PROPERTIES
Important health, safety and environmental information
Flash point
10. STABILITY AND REACTIVITY
Conditions to avoid
Keep away from heat.
Materials to avoid
Reactions with strong acids and alkalies.
Reactions with strong oxidising agents.
Hazardous decomposition products
carbon monoxide and carbon dioxide
Toxic gases/vapours
Thermal decomposition
No decomposition if used as directed.
WEICON GmbH & Co. KG Königsberger Straße 255 D-48157 Münster
Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH)Printed Easy-Mix Metal Hardener (GB)
11. TOXICOLOGICAL INFORMATION
Additional information
Labelling in compliance with the assessment procedure specified in the EC guidelines 1999/45/EC.
12. ECOLOGICAL INFORMATION
General regulation
Do not allow uncontrolled leakage of product into the environment.
Product is not allowed to be discharged into aquatic environment.
13. DISPOSAL CONSIDERATIONS
Recommendations for the product
Cured material may be considered inert and disposed of as builders waste.
Remove in accordance with local official regulations.
Recommendations for packaging
Uncontaminated packaging may be treated as household waste.
Packaging that cannot be cleaned should be disposed of like the product.
14. TRANSPORT INFORMATION
Transport/further information
No hazardous material as defined by the prescriptions.
15. REGULATORY INFORMATION
Remarks for classification
The product does not require a hazard warning label in accordance with EC directives.
Special labelling for certain preparations
Safety data sheet available for professional user on request.
16. OTHER INFORMATION
Recommendend uses and restrictions
National and local regulations concerning chemicals shall be observed.
Further information
The information contained herein is based on the state of our knowledge. It characterizes the product with regard to the
appropriate safety precautions. It does not represent a guarantee of the properties of the product.
Wording of the R-phrases specified in chapter 3 (not the classification of the formulation!)
R 22 Harmful if swallowed.
R 36/38 Irritating to eyes and skin.
WEICON GmbH & Co. KG Königsberger Straße 255 D-48157 Münster

Source: http://fossberg.is/gogn/2010/tveggjathatta2.pdf

skorpionzinc.com.na

SAFETY DATA SHEET Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II - United Kingdom (UK) METALLIC ZINC 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Product name Synonyms : Zinc Metal Sheets; Zinc Metal Shot; Zinc Metal Strips REACH Registration Chemical Formula 1.2 Relevant identified uses o

Suppressive effects of dietary fiber in yogurt on the postprandial serum lipid levels in healthy adult male volunteers

Biosci. Biotechnol. Biochem., 68 (5), 1135–1138, 2004Suppressive Effects of Dietary Fiber in Yogurt on the PostprandialSerum Lipid Levels in Healthy Adult Male VolunteersShizuki KONDO, Jin-zhong XIAO,y Noritoshi TAKAHASHI, Kazuhiro MIYAJI,Keiji IWATSUKI, and Sadayuki KOKUBOFood Research and Development Laboratory, Morinaga Milk Industry Co., Ltd., Zama 228-8583, JapanReceived October 24,

Copyright © 2010-2019 Pdf Physician Treatment